Angle Rolls:

Bertsch


Bertsch Hydraulic Angle RollsBertsch

Machine Design
The Bertsch Double Pinch design reduces end flats to a minimum. The top roll is in a fixed position, while the two lower rolls have independent hydraulic adjustments. This design provides ease of operator control as well as more uniform rolling results.

Vertical or Horizontal Working Position
The Bertsch Angle Roll can be designed to work equally well in the vertical or horizontal position.


Hydraulic Drive

All three rolls are driven by planetary speed reducers for positive feed and efficient torque transmission. Bertsch Angle Rolls are designed with a self speed compensating drive for proper roll rotation between the top and lower rolls.

Hydraulically Adjustable Guide Rollers
The hardened guide rollers are hydraulically adjustable from the operator’s control pendant. Each guide roll assembly is provided with a “leg-in” attachment.

Operator’s Control Pendant
All essential operator functions are located in a “walk-around” pendant type control for maximum mobility.

Standard Dies Furnished
One complete set of standard dies is furnished with each machine. Each die set is supplied with one hardened spacer to provide support for the tip of the vertical leg being formed. Standard dies will accept: flat bar, bar-on-edge, square bar, angle leg-in, angle leg-out, “T” leg-in, “T” leg-out, and “T” on web.

Standard Features
- Vertical or horizontal working position
- All three rolls driven
- Double pinch design
- Two lower rolls are independently adjustable
- Energy efficient “load sensing” hydraulic pump
- Mechanical pointer and scale indicator for each adjustable lower roll (digital readouts optional)
- Operator’s “walk-around” pendant control station
- Hardened steel guide rollers
- Pressure filter
- Set of standard dies
- Heavy fabricated frame
- Complete with electrical disconnect

Standard Safety Features
- Electric cabinet having door interlocked with fusible type disconnect
- Power “on” button at control station with built-in light
- Line starter with thermal overload and low voltage protection
- A system pressure relief valve limiting the hydraulic drive and bending rolls to a factory preset pressure
- Reduced voltage electrical controls
- Emergency “stop” buttons mounted on both sides of the machine and in the operator’s control station
- Toggle type switches, having spring return to “off” position, for controlling all the operating functions of the machine.

 



Tauring


TAURING MACHINES

Alpha Series Benders
Tauring Alpha Series Bender
The Alpha series are three driving roll machines which can be supplied with 40mm, 50mm, 70mm, 100mm, 150mm and 250mm. Capacities can vary depending on model from 1/4" to 10" angle. These machines can be supplied with either hydraulic push-button systems or CNC Controls such as CNC-C 20 program / 30 steps, CNC-S 40 program /100 steps or CNC-8 unlimited Touch Screen Control with up to 250 steps. Please let us know on the material you intend to bend for our recommendation of equipment.

The Alpha benders were designed specifically for bending large sections. Sizes vary up to a 20" pipe size.


Delta Series Benders

Tauring Delta Series Benders
The Delta series "Pyramid Style" are three driving roll machines which can be supplied with 40mm, 50mm, 60mm, 80mm shafts. Capacities can vary depending on model from 1/4" to 4" angle. These machines can be supplied with either hydraulic push-button systems or CNC Controls such as CNC-C 20 program / 30 steps, CNC-S 40 program /100 steps or CNC-8 unlimited Touch Screen Control with up to 250 steps. Please let us know on the material you intend to bend for our recommendation of equipment.


Slalom Series Benders

Tauring Slalom Series Bender
The Slalom series has an "International Patent" and is known for its left and right bending capabilities. The Slalom 20 and 50 are equipped with "4" driving rolls, "2" guiding rolls and "2" bending rolls while the Slalom 60 is well equipped with "6" driving rolls and "2" bending rolls. The only options of controls on this series is the CNC-S 40 program /100 steps or CNC-8 unlimited Touch Screen Control with up to 100 steps. Please let us know on the material you intend to bend for our recommendation of equipment.


Standard Characteristics


- Left and right bending
- Bending rolls with hydraulic adjustment with numerical control
- Possibility of operating equipment in manual or automatic cycle
- Bending in scalar or progressive adjustment to execute bending radii perfectly joined together, thus avoiding any deformation or collapsing, also an advantage when bending material with thin walls.
- 4 or 6 driving rolls guide the material to the bending rolls
- 2 "Fold-away" rolls carry out the bending process.

 

 

Contact us for more information:

Name:
Email:
Phone:



Or give us a call at: 303-466-7341
Monday - Friday, 7:00 AM - 5:00 PM, MST