Bertsch bending rolls are designed and built to accurately form metal from gauge thickness through 14" thick and larger, and can be custom designed to meet specific applications.

Bertsch Plate Roll



More Pre-Bend
Bertsch machines pre-bend to the machine’s rolling capacity. Most competitors specify less pre-bending capacity than rolling capacity.

Minimum Rolling Diameter at Maximum Material Thickness/Width
Bertsch rates its machines to pre-bend and roll material to small diameters. Most competitors limit their maximum capacity to five times the top roll diameter.

Bertsch Plate Rolls

Designed for Longer Life
Rectilinear guides provide longer service life and maintain better parallelism over the life of the machine.

Better Quality Parts
Rectilinear guides also produce the smallest flats on the ends of rolled parts.

Easier to Use
Bertsch’s electronic leveling system allows operators to make roll corrections on both ends of each roll, not just one end.

Higher Capacity
Bertsch rates its machines for the nominal thickness and length of the machine. For example, a 1-inch, 10-foot machine can roll a 10-foot wide piece of 1-inch thick material to its minimum roll diameter. Other manufacturer’s specifications are more closely matched to Bertsch’s smaller capacity models.

Comparison of 1 in./10 ft. Rolls — Pre-Bending
While many manufacturers have the ability to roll to their maximum capacity, they cannot pre-bend the material. This forces the user to either pre-bend material on a press brake, or purchase a larger machine with higher capacity.

Bertsch Plate Roll Comparison Chart

Comparison of 1 in./10 ft. Rolls
Rolling Capacity – 146” Diameter

Bertsch Plate Roll Comparison Chart

Comparison of 1 in./10 ft. Rolls
Rolling Capacity – 16.8” Diameter

Bertsch Plate Roll Comparison Chart






Contact us for more information:


Or give us a call at: 303-466-7341
Monday - Friday, 7:00 AM - 5:00 PM, MST




Back to all products